Quality inspection of a factory

Quality inspection of a factory is the process of testing and determining the quality of the factory, construction component, or construction project in comparison to design requirements and standards. This is achieved through a combination of testing, recording, and visually assessing the current condition.

Quality inspection of a factory, along with the evaluation of quality and structural capacity of the construction, is of utmost importance and cannot be overlooked.

Inspection of a factory directly influences the assessment of the factory and workshop structure quality. This compliance aligns with the regulations outlined in Decree No. 06/2021/ND-CP issued by the Government on January 26, 2021 (referenced from the Ministry of Construction's source here), concerning the management of construction quality and maintenance, alongside related decisions and decrees.

How often is it necessary to inspect a workshop in a fixed cycle?

Inspecting the workshop at regular intervals serves the purpose of timely identification of signs of deterioration or wear and tear in the structure during its use. This allows for early measures to be taken to maintain the load-bearing capacity and longevity of the structure.

- Concerning new construction, as stipulated in Article 3, Clause 17 of Circular No. 10/2021/TT-BXD issued on August 25, 2021 (referenced from the Ministry of Construction's Circular here):

+ The initial workshop inspection occurs after 10 years from the commencement of operation and utilization of the structure, as regulated by the law.

+ Subsequent safety evaluations are conducted at intervals of every 05 years for the following inspections.

- For structures already in operation, in accordance with Clause 5.5.3 of TCVN 9343:2012 Concrete and Reinforced Concrete Structures - Maintenance Guidelines (refer to TCVN here), the workshop inspection cycles are determined as follows:

+ Particularly critical structures: Every 2 to 3 years.

+ Structures regularly used by a large number of people or with heavy traffic: Every 3 to 5 years.

+ Other industrial and civil structures: Every 5 to 10 years.

+ Structures affected by coastal climate and chemical corrosion: Every 1 to 2 years

Purpose of Quality inspection of a factory

- Clearly define the quality and condition of the structure.

- Assist the Investor in making appropriate decisions based on needs, scale, functionality, ensuring safety during usage.

- Inspection and certification evaluate the quality, safety, and usability of the workshop—one of the vital reports in the safety records during safety audits for workshops.

Method of Conducting inspection of a factory

The workshop inspection and plant evaluation are carried out to assess the existing structural capacity. Therefore, the primary focus should be on gathering actual data through surveys, on-site experiments, laboratory testing, or a combination of both. Simultaneously, utilizing analytical and computational methods following construction standards and regulations to draw clear, precise, and scientifically sound conclusions.

Scope of Work during inspection of a factory

- Observation and examination of the current state of the structure: Identifying architectural features, structural load-bearing aspects, noting existing damages, and deficiencies.

Images from ICCI checking the actual structural components' characteristics at site

- Inspecting the geometric dimensions of the structural components of the construction.

Images from ICCI checking the geometric of the structural components at site

- Inspecting concrete strength: Using the method of on-site core drilling and compression testing in the laboratory combined with non-destructive testing using rebound hammers.

Images from ICCI inspecting concrete strength using rebound hammers at site

- Inspecting steel reinforcement within concrete components: Utilizing ultrasonic methods, combined with drilling and coring (if applicable).

Images from ICCI Inspecting steel reinforcement within concrete components at site

- Inspecting bolt connections: Checking the quantity, diameter, and tightness of the bolt connections.

Images from ICCI inspecting bolt connections at site

- Inspecting for deflection: Aimed at determining the existing deflection of structural elements such as beams, floors, and rafters

Images from ICCI inspecting for deflection at site

-Inspecting for verticality: Aimed at determining the existing tilt or vertical alignment of columns, walls, and the overall structure.

Images from ICCI inspecting for verticality at site

- Restoration of the site if drilling or coring is performed on-site.

- Calculating and verifying the load-bearing capacity and structural load on the construction, assessing the safety factor of the structure.

- Developing computational models.

- Calculating and verifying the load-bearing capacity and structural load on the construction, assessing the safety factor of the structure.

- Developing computational models.

In 2007, International Construction Consultancy and Inspection Joint Stock Company (ICCI) registered for the construction quality inspection sector, obtaining Business Registration Certificate No. 0305296785 issued by the Department of Planning and Investment.

Proudly boasting over 16 years of experience, ICCI is recognized as a reputable construction inspection company. Even after project completion, ICCI continues to safeguard its clients' rights. Customer trust and satisfaction serve as our driving force for development and enhancement to meet job demands.

ICCI's Implementation Criteria:

1. Work Progress: Swift and adaptable.

2. Work Quality: Adhering to Ministry of Construction regulations, ensuring the best outcomes.

3. Cost Efficiency: Corresponding, economical, effective, and reflective of the value invested by our clients.

ICCI's capabilities and its team of engineers comply with the regulations stipulated by the competent state authorities.

- The team of engineers at ICCI is professionally trained and holds professional certificates matching the level and type of projects they engage in.

- ICCI owns the LAS-XD 203 laboratory, a competitive advantage over other firms in the market that often have to contract other units for sample testing. Having its own laboratory allows ICCI to proactively control quality, shorten timelines, and optimize costs.

- In 2017, ICCI was recognized by the Ministry of Construction's Department of Construction Activities Management as one of the first construction inspection companies meeting the qualifications for Grade I construction inspection capacity. By 2018 and 2019, ICCI participated in significant projects such as Landmark 81, the Carina apartment fire incident, as well as various offices and workshops across different fields. As of 2023, ICCI has contributed to 4,386 projects across 56 provinces and cities nationwide.

ICCI has been involved in inspecting numerous Grade I and Grade II projects nationwide

Capacity profile: download the file here

Contact ICCI via hotline - 0903994577 - dungtvkd@icci.vn - icci@icci.vn if your project requires workshop inspection, construction inspection, encounters unwanted incidents during construction or usage, or needs advice on construction-related matters. With our expertise and experience, ICCI ensures the highest quality and economic value for our clients